{"id":16151,"date":"2026-09-16T08:50:19","date_gmt":"2026-09-16T08:50:19","guid":{"rendered":"https:\/\/www.hndfcrane.com\/?post_type=posts&#038;p=16151"},"modified":"2026-09-16T08:50:21","modified_gmt":"2026-09-16T08:50:21","slug":"overhead-crane-hook-types-and-safety-requirements","status":"publish","type":"posts","link":"https:\/\/www.hndfcrane.com\/bn\/posts\/overhead-crane-hook-types-and-safety-requirements\/","title":{"rendered":"Overhead Crane Hook Types and Safety Requirements"},"content":{"rendered":"<div class=\"wp-block-rank-math-toc-block\" id=\"rank-math-toc\"><p>\u09b8\u09c2\u099a\u09bf\u09aa\u09a4\u09cd\u09b0<\/p><nav><ul><li><a href=\"#overhead-crane-hook-types-and-structure\">Overhead Crane Hook Types and Structure<\/a><\/li><li><a href=\"#overhead-crane-hook-blocks\">Overhead Crane Hook Blocks<\/a><\/li><li><a href=\"#dangerous-sections-of-an-overhead-crane-hook\">Dangerous Sections of an Overhead Crane Hook<\/a><\/li><li><a href=\"#overhead-crane-hook-safety-inspection-requirements\">Overhead Crane Hook Safety Inspection Requirements<\/a><ul><li><a href=\"#overhead-crane-hook-load-test\">Overhead Crane Hook Load Test<\/a><\/li><li><a href=\"#overhead-crane-hook-scrap-criteria\">Overhead Crane Hook Scrap Criteria<\/a><\/li><\/ul><\/li><\/ul><\/nav><\/div>\n\n\n\n<p>The overhead crane hook is one of the most widely used load-handling devices. It has a simple structure, is easy to manufacture, and can be used in many lifting applications.<\/p>\n\n\n\n<figure class=\"wp-block-image size-full\"><img loading=\"lazy\" decoding=\"async\" width=\"2400\" height=\"1600\" src=\"https:\/\/www.hndfcrane.com\/wp-content\/uploads\/hook-7.jpg\" alt=\"\u09b9\u09c1\u0995\" class=\"wp-image-956\" srcset=\"https:\/\/www.hndfcrane.com\/wp-content\/uploads\/hook-7.jpg 2400w, https:\/\/www.hndfcrane.com\/wp-content\/uploads\/hook-7-1536x1024.jpg 1536w, https:\/\/www.hndfcrane.com\/wp-content\/uploads\/hook-7-2048x1365.jpg 2048w\" sizes=\"(max-width: 2400px) 100vw, 2400px\" \/><\/figure>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"overhead-crane-hook-types-and-structure\">Overhead Crane Hook Types and Structure<\/h2>\n\n\n\n<p>According to the hook shape, <a href=\"https:\/\/www.hndfcrane.com\/bn\/crane-hooks\/\">overhead crane hooks<\/a> can be divided into single hooks and double hooks. A single hook is easier to manufacture and use, while a double hook has a more favorable force condition. Single hooks are used for smaller lifting capacities. When the lifting capacity is large, double hooks are often used to avoid making the hook too heavy. For casting cranes, laminated single hooks are still used even for large lifting capacities because they must match the ladle.<\/p>\n\n\n\n<figure class=\"wp-block-image size-full\"><img loading=\"lazy\" decoding=\"async\" width=\"1477\" height=\"500\" src=\"https:\/\/www.hndfcrane.com\/wp-content\/uploads\/2026\/09\/crane-hook-types.png\" alt=\"\" class=\"wp-image-16156\"\/><figcaption class=\"wp-element-caption\">(a) Forged Single Hook (b) Forged Double Hook (c) Laminated Single Hook (d) Laminated Double Hook<\/figcaption><\/figure>\n\n\n\n<p>Forged hooks should be marked in a low-stress area with permanent marks that are not easy to wear off. The marks should include the rated lifting capacity, manufacturer&#8217;s mark, inspection mark, date, and serial number. After the forged hook manufacturer completes surface inspection and load testing, a certificate of conformity should be provided.<\/p>\n\n\n\n<p>Laminated hooks are fastened by riveting each plate layer. After riveting, the front end and upper end of the hook plates should be welded. To prevent wear at the trunnion area, a metal wear-resistant plate should be installed on the upper side of the hook bend and should be easy to remove and install. A laminated hook is made by stacking several hook-shaped steel plates and connecting them with rivets.<\/p>\n\n\n\n<p>To prevent accidental unhooking, the hook should be equipped with a safety device that prevents the load from slipping off.<\/p>\n\n\n\n<figure class=\"wp-block-image size-full\"><img loading=\"lazy\" decoding=\"async\" width=\"900\" height=\"954\" src=\"https:\/\/www.hndfcrane.com\/wp-content\/uploads\/2026\/09\/crane-hook-safety-latch-device.png\" alt=\"\" class=\"wp-image-16157\"\/><\/figure>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"overhead-crane-hook-blocks\">Overhead Crane Hook Blocks<\/h2>\n\n\n\n<p>An overhead crane hook block is a combination of the hook and the moving pulley block. Hook blocks include ordinary hook blocks and electric rotating hook blocks. In a typical ordinary hook block, the hook can be manually pushed to rotate. When the hook is not allowed to rotate, a locking device can be added.<\/p>\n\n\n\n<figure class=\"wp-block-image size-full\"><img loading=\"lazy\" decoding=\"async\" width=\"1000\" height=\"666\" src=\"https:\/\/www.hndfcrane.com\/wp-content\/uploads\/2026\/09\/crane-hook-block.png\" alt=\"\" class=\"wp-image-16158\"\/><\/figure>\n\n\n\n<p>Ordinary hook blocks are available in long-type and short-type structures.<\/p>\n\n\n\n<p>A long-type hook block uses an ordinary short hook with a short shank. The hook is supported on the hook crossbeam, while the sheaves are supported on a separate sheave shaft. This structure has a larger overall height and reduces the effective lifting height.<\/p>\n\n\n\n<figure class=\"wp-block-image size-full\"><img loading=\"lazy\" decoding=\"async\" width=\"537\" height=\"510\" src=\"https:\/\/www.hndfcrane.com\/wp-content\/uploads\/2026\/09\/long-and-short-crane-hook-block-diagram.png\" alt=\"\" class=\"wp-image-16159\"\/><\/figure>\n\n\n\n<p>Short-type hook blocks used to use long hooks. In this structure, the sheaves are directly mounted on the hook crossbeam, greatly reducing the height. However, this structure can only be used for double-rope reeving. A short-type hook block is suitable only for smaller reeving ratios. When the reeving ratio is large, the number of sheaves increases, the hook crossbeam becomes too long, the bending moment becomes too large, and the hook&#8217;s own weight increases.<\/p>\n\n\n\n<figure class=\"wp-block-image size-full\"><img loading=\"lazy\" decoding=\"async\" width=\"2496\" height=\"1664\" src=\"https:\/\/www.hndfcrane.com\/wp-content\/uploads\/2026\/09\/short-type-overhead-crane-hook-block.png\" alt=\"\" class=\"wp-image-16164\" srcset=\"https:\/\/www.hndfcrane.com\/wp-content\/uploads\/2026\/09\/short-type-overhead-crane-hook-block.png 2496w, https:\/\/www.hndfcrane.com\/wp-content\/uploads\/2026\/09\/short-type-overhead-crane-hook-block-1536x1024.png 1536w, https:\/\/www.hndfcrane.com\/wp-content\/uploads\/2026\/09\/short-type-overhead-crane-hook-block-2048x1365.png 2048w\" sizes=\"(max-width: 2496px) 100vw, 2496px\" \/><\/figure>\n\n\n\n<p>An electric rotating hook block is usually driven by a cycloidal pinwheel geared motor with braking function, marked as item 1 in Fig. 2-21. A three-in-one reducer may also be used. The motor drives gears 3 and 4 through friction coupling 2, causing the hook to rotate. When the hook reaches the specified position, cam switch plate 5 touches limit switch 6, the circuit is cut off, the brake motor brakes, and the hook stops at the set angle. An angle locking device may also be provided according to user requirements.<\/p>\n\n\n\n<p>The rotation speed of an electric rotating hook is generally about 2 r\/min, and the rotation angle is not more than 270 degrees.<\/p>\n\n\n\n<figure class=\"wp-block-image size-full\"><img loading=\"lazy\" decoding=\"async\" width=\"500\" height=\"634\" src=\"https:\/\/www.hndfcrane.com\/wp-content\/uploads\/2026\/09\/electric-rotating-crane-hook-block-diagram.png\" alt=\"\" class=\"wp-image-16161\"\/><\/figure>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"dangerous-sections-of-an-overhead-crane-hook\">Dangerous Sections of an Overhead Crane Hook<\/h2>\n\n\n\n<p>The dangerous sections of an overhead crane hook are important areas for daily inspection and safety inspection. Based on force analysis, the following dangerous sections can be identified.<\/p>\n\n\n\n<figure class=\"wp-block-image size-full\"><img loading=\"lazy\" decoding=\"async\" width=\"900\" height=\"1216\" src=\"https:\/\/www.hndfcrane.com\/wp-content\/uploads\/2026\/09\/crane-hook-dangerous-sections-diagram.png\" alt=\"\" class=\"wp-image-16162\"\/><\/figure>\n\n\n\n<p>Assume that the weight suspended on the hook is Q.<\/p>\n\n\n\n<ul>\n<li>I &#8211; I: The load acts on section I-I of the hook through the wire rope, creating a tendency to shear the hook. This section is subjected to shear stress.<\/li>\n\n\n\n<li>III &#8211; III: Under the action of weight Q, this section tends to be pulled apart. It is located at the thread relief groove of the cylindrical shank of the hook. This is the smallest section of the hook and has a risk of tensile failure.<\/li>\n\n\n\n<li>II &#8211; II: The inner side is subjected to tensile stress, while the outer side is subjected to compressive stress. According to calculation, the tensile stress on the inner side is greater than the compressive stress on the outer side. Under the action of load Q, the hook is subjected to tensile and shear stress and also tends to be straightened. In the hook shown in Fig. 2-4, the sections to the right of the centerline are subjected not only to tension, but also to moment M.<\/li>\n<\/ul>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"overhead-crane-hook-safety-inspection-requirements\">Overhead Crane Hook Safety Inspection Requirements<\/h2>\n\n\n\n<p>Hooks are widely used in different types of lifting machinery. Some hooks are manufactured according to previously used industry standards, while others are manufactured according to GB10051.1-5, Lifting Hooks. During inspection and testing, the inspection items and content are generally the same for different hook types, but the specific requirements may differ slightly.<\/p>\n\n\n\n<p>An overhead crane hook should be inspected once every six months and should be cleaned and lubricated to prevent fatigue cracks.<\/p>\n\n\n\n<p>The general inspection method is to first clean the hook body with kerosene. Then use a 20x magnifying glass to check whether the hook body has fatigue cracks, especially at the dangerous sections. The thread relief groove of the hook shank is a stress concentration area and should be checked carefully for cracks. For a plate hook, the bushing, pins, small holes, lifting lugs, and other fasteners should also be checked for looseness and wear. For hooks used on some large cranes or heavy-duty-class cranes, nondestructive testing should also be used to check for internal defects.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\" id=\"overhead-crane-hook-load-test\">Overhead Crane Hook Load Test<\/h3>\n\n\n\n<p>For a new hook, in addition to the technical certificate from the manufacturer, a load test should be carried out according to the marks on the hook. The hook can be used only after its performance is confirmed to be qualified. For a hook that has worn during service, progressive load testing should also be carried out to redetermine the allowable rated lifting capacity.<\/p>\n\n\n\n<p>After the hook under inspection is loaded to the specified test load, the load should be lifted and suspended for 10 minutes. After unloading, there should be no defects or deformation. The hook surface should then be inspected with a 20x magnifying glass and should have no cracks. The hook opening should be measured, and the increase compared with the original value should not exceed 0.25%.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\" id=\"overhead-crane-hook-scrap-criteria\">Overhead Crane Hook Scrap Criteria<\/h3>\n\n\n\n<p>A hook should be scrapped if any of the following conditions occur:<\/p>\n\n\n\n<ul>\n<li>Cracks appear on the surface.<\/li>\n\n\n\n<li>Wear at the dangerous section reaches 10% of the original dimension.<\/li>\n\n\n\n<li>The hook opening increases by 15% compared with the original dimension.<\/li>\n\n\n\n<li>Torsional deformation exceeds 10 degrees.<\/li>\n\n\n\n<li>Plastic deformation occurs at the dangerous section or hook neck.<\/li>\n<\/ul>","protected":false},"excerpt":{"rendered":"Crane hook types, hook block structures, dangerous sections, load testing, and safety inspection requirements explained.","protected":false},"featured_media":16171,"parent":0,"menu_order":0,"template":"single-SEO-Table.php","posts_category":[197],"posts_tag":[],"acf":[],"_links":{"self":[{"href":"https:\/\/www.hndfcrane.com\/bn\/wp-json\/wp\/v2\/xmxposts\/16151"}],"collection":[{"href":"https:\/\/www.hndfcrane.com\/bn\/wp-json\/wp\/v2\/xmxposts"}],"about":[{"href":"https:\/\/www.hndfcrane.com\/bn\/wp-json\/wp\/v2\/types\/posts"}],"version-history":[{"count":13,"href":"https:\/\/www.hndfcrane.com\/bn\/wp-json\/wp\/v2\/xmxposts\/16151\/revisions"}],"predecessor-version":[{"id":16173,"href":"https:\/\/www.hndfcrane.com\/bn\/wp-json\/wp\/v2\/xmxposts\/16151\/revisions\/16173"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.hndfcrane.com\/bn\/wp-json\/wp\/v2\/media\/16171"}],"wp:attachment":[{"href":"https:\/\/www.hndfcrane.com\/bn\/wp-json\/wp\/v2\/media?parent=16151"}],"wp:term":[{"taxonomy":"posts_category","embeddable":true,"href":"https:\/\/www.hndfcrane.com\/bn\/wp-json\/wp\/v2\/posts_category?post=16151"},{"taxonomy":"posts_tag","embeddable":true,"href":"https:\/\/www.hndfcrane.com\/bn\/wp-json\/wp\/v2\/posts_tag?post=16151"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}