High Strength Crane Sheaves with Precision Rope Grooves

Forged Sheaves

High Load & Durable
Cast Sheaves

Low Cost & Mass Production
Precision Grooves

Extended Rope Life

4 Proven Crane Sheave Types for Distinct Performance Needs

Forged Crane Sheaves

Material: Precision steel 42CrMo, providing stable strength and good durability.
Forging Process: Improves metal structure and grain flow for high mechanical strength.
Cost Level: Higher cost due to complex forging steps.
Machinability: Easy to machine, causing low wire rope wear.
Typical Use: For conventional CD and MD electric hoist hooks.

Cast Crane Sheaves

Cost Efficiency: One-step casting enables complex shapes and a lower cost.
Service Life: Graphite lubrication plus quench, temper, and shot blasting reduce wear.

Rolled Crane Sheaves

Hot Rolling: Enhances sheaves bending, shear strength, and structural stability.
Precision Groove Grinding: Accurate groove radius for smoother wire rope contact.

Nylon Crane Sheaves

Spark-Free Safety: Machining produces no sparks, enhancing safety in flammable or explosive environments.
Typical Use: Commonly used in european type electric hoists hooks.

Proven Crane Sheaves for Multiple Applications

Cast Crane Sheaves for Overhead Cranes

Egenskaper

Material: Cast QT400-18 steel.
Groove Surface: Grade 1 finish, RA 6.5.
Wheel-to-Rope Ratio: Diameter >20× wire rope diameter to prolong rope life.
Groove Profile: Complies with GB/ZBJ8006.1-87; ensures wire rope longevity.

Rolled Crane Sheaves for RMG Gantry Cranes

Egenskaper

Groove Treatment: Medium-frequency hardened, HRC 40–50+.
Mounting Base: Split-type design with standard specifications for easy spare part interchange.
Rope Alignment: Entry/exit deviation ≤2.5°.
Wheel Diameter: Minimum 25× wire rope diameter.

Forged Crane Sheaves for Foundry Overhead Cranes

Egenskaper

Material: Steel AISI-4140
Surface Hardness: Up to HRC 65 for enhanced wear resistance.
Rim Hardening Options: Rim Toughened (≤ RC 40); Deep Hardened (≤ RC 65*).
Compliance Standards: Complies with CMAA and the AIST #6 Crane Specifications.

Nylon Crane Sheaves for European Overhead Cranes

Egenskaper

Ultra-Lightweight: Cast nylon sheaves weigh only 1/7–1/8 of steel.
Enhanced Rope Support: Elastic groove deformation under load increases rope–groove contact area, improving load distribution.
Corrosion Resistant: No rust or seawater corrosion; no coatings required.

Rolled Crane Sheaves for Harbour Portal Cranes

Egenskaper

Material: Hot-rolled Q345B steel.
Groove Heat Treatment: Rope grooves hardened to RC40–45, hardening depth >2mm, precision machined.
Groove Depth: Minimum 1.5× wire rope diameter, smooth surface.
Rope Alignment: Rope entry/exit angle deviation ≤2.5° from wheel axis vertical plane.

Rolled Crane Sheaves for Mechanical Four Rope Grabs Bucket

Egenskaper

Material Density: Sludge bulk density 0.8–0.9 t/m³ (1–3 spans); Formed fuel bulk density 1.1–1.3 t/m³ (4 spans).
Grab Volume: 2.5 m³ (sludge).
Wire Rope Diameter: 17.5 mm.

6 Key Stages in Precision Forged Crane Sheave Production

1CNC Cutting & Blanking

German Mesell CNC cutting machine delivers precise cuts with Ra ≤12.5 μm.
Raw materials undergo basic spectral and mechanical checks to ensure adequate strength.

2Controlled Material Heating

Heating furnace raises plasticity and lowers forming resistance.
Proper temperature range promotes recrystallization and uniform grain structure.

3Forging Forming

8000-ton forging ring press applies localized pressure with minimal die contact.
Requires only 1/5–1/10 of conventional forging force with a short 2–4 min cycle.

4Heat Treatment

Induction quenching machine performs targeted hardening on rope grooves.
Automated control ensures stable hardness depth with ±0.05 mm accuracy.

5Presisjonsmaskinering

CNC pulley lathe completes turning and drilling in one setup.
Repeat positioning ≤0.01 mm with surface finish Ra ≤1.6 μm.

6Final Inspection&Packing

Dimensional checks, groove inspection, and rotation testing before release.
Anti-corrosion protection and reinforced packing for safe transport and delivery.

DAFANG CRANE: Your Trusted Partner for Cranes and Industrial Solution

Fabrikkstyrke

Etablert i 2006, Kapital: 84,65 millioner USD
Over 80 000 kraner levert over hele verden
Eksportert til over 100 land, over 130 ettersalgssentre

Intelligent produksjon

1 053 000 m² intelligent base
Automatiserte linjer for pålitelig levering
Fullspektret egenutviklede kraner og stålkonstruksjoner

Kvalitet og sertifisering

11 inspeksjonstrinn, 200+ testelementer
Alt-i-ett-tjeneste: design, produksjon, logistikk, installasjon og ettersalg

DAFANG CRANE Holds Complete Certifications for Global Compliance

CE Certificate for Gantry Crane

EAC Certificate for Gantry Crane

ISO-sertifikat for kvalitetsstyringssystem

Nuclear Industry Quality Management System Certificate

Produksjonslisens for spesialutstyr

Kundebesøk til DAFANG CRANE-fabrikken

Pakistansk | Introduksjon til sertifikat

Chile | Verkstedinspeksjon

Kenyansk | Fabrikkomvisning

Boliviansk | Fabrikkomvisning

Hviterussisk | Fabrikkomvisning

Russia | Factory Tour

USA | Verkstedinspeksjon

Jordan | Fabrikkomvisning

Pålitelig globalt kranmerke: Oppdag DAFANG CRANE på internasjonale messer

FABEX & Metall & Stål Saudi-Arabia 2025 Utstilling 1

Usbekistans 8. nasjonale råvareutstilling for Silkeveien Utstilling 2

Usbekistan Maskinmesse 2025 Utstilling 3

10. Changyuan internasjonale kranmesse Utstilling 4

2024 Shanghai tungmaskinutstilling Utstilling 5

7. Changyuan internasjonale kranmesse Utstilling 6

24-timers presisjonstilbud

Cindy

Internasjonal salgssjef

Hva skjer: +86 191 3738 6654
E-post: sales@hndfcrane.com

Jeg heter Cindy, og har 10 års arbeidserfaring i kranbransjen og opparbeidet meg et vell av fagkunnskap.

Hvis du har noen behov eller spørsmål om kraner, er du velkommen til å kontakte meg. Jeg vil bruke min ekspertise og praktiske erfaring til å hjelpe deg med å løse problemet!