High Strength Crane Sheaves with Precision Rope Grooves

Forged Sheaves

High Load & Durable
Cast Sheaves

Low Cost & Mass Production
Precision Grooves

Extended Rope Life

4 Proven Crane Sheave Types for Distinct Performance Needs

Forged Crane Sheaves

Material: Precision steel 42CrMo, providing stable strength and good durability.
Forging Process: Improves metal structure and grain flow for high mechanical strength.
Cost Level: Higher cost due to complex forging steps.
Machinability: Easy to machine, causing low wire rope wear.
Typical Use: For conventional CD and MD electric hoist hooks.

Cast Crane Sheaves

Cost Efficiency: One-step casting enables complex shapes and a lower cost.
Service Life: Graphite lubrication plus quench, temper, and shot blasting reduce wear.

Rolled Crane Sheaves

Hot Rolling: Enhances sheaves bending, shear strength, and structural stability.
Precision Groove Grinding: Accurate groove radius for smoother wire rope contact.

Nylon Crane Sheaves

Spark-Free Safety: Machining produces no sparks, enhancing safety in flammable or explosive environments.
Typical Use: Commonly used in european type electric hoists hooks.

Proven Crane Sheaves for Multiple Applications

Cast Crane Sheaves for Overhead Cranes

Funktioner

Material: Cast QT400-18 steel.
Groove Surface: Grade 1 finish, RA 6.5.
Wheel-to-Rope Ratio: Diameter >20× wire rope diameter to prolong rope life.
Groove Profile: Complies with GB/ZBJ8006.1-87; ensures wire rope longevity.

Rolled Crane Sheaves for RMG Gantry Cranes

Funktioner

Groove Treatment: Medium-frequency hardened, HRC 40–50+.
Mounting Base: Split-type design with standard specifications for easy spare part interchange.
Rope Alignment: Entry/exit deviation ≤2.5°.
Wheel Diameter: Minimum 25× wire rope diameter.

Forged Crane Sheaves for Foundry Overhead Cranes

Funktioner

Material: Steel AISI-4140
Surface Hardness: Up to HRC 65 for enhanced wear resistance.
Rim Hardening Options: Rim Toughened (≤ RC 40); Deep Hardened (≤ RC 65*).
Compliance Standards: Complies with CMAA and the AIST #6 Crane Specifications.

Nylon Crane Sheaves for European Overhead Cranes

Funktioner

Ultra-Lightweight: Cast nylon sheaves weigh only 1/7–1/8 of steel.
Enhanced Rope Support: Elastic groove deformation under load increases rope–groove contact area, improving load distribution.
Corrosion Resistant: No rust or seawater corrosion; no coatings required.

Rolled Crane Sheaves for Harbour Portal Cranes

Funktioner

Material: Hot-rolled Q345B steel.
Groove Heat Treatment: Rope grooves hardened to RC40–45, hardening depth >2mm, precision machined.
Groove Depth: Minimum 1.5× wire rope diameter, smooth surface.
Rope Alignment: Rope entry/exit angle deviation ≤2.5° from wheel axis vertical plane.

Rolled Crane Sheaves for Mechanical Four Rope Grabs Bucket

Funktioner

Material Density: Sludge bulk density 0.8–0.9 t/m³ (1–3 spans); Formed fuel bulk density 1.1–1.3 t/m³ (4 spans).
Grab Volume: 2.5 m³ (sludge).
Wire Rope Diameter: 17.5 mm.

6 Key Stages in Precision Forged Crane Sheave Production

1CNC Cutting & Blanking

German Mesell CNC cutting machine delivers precise cuts with Ra ≤12.5 μm.
Raw materials undergo basic spectral and mechanical checks to ensure adequate strength.

2Controlled Material Heating

Heating furnace raises plasticity and lowers forming resistance.
Proper temperature range promotes recrystallization and uniform grain structure.

3Forging Forming

8000-ton forging ring press applies localized pressure with minimal die contact.
Requires only 1/5–1/10 of conventional forging force with a short 2–4 min cycle.

4Heat Treatment

Induction quenching machine performs targeted hardening on rope grooves.
Automated control ensures stable hardness depth with ±0.05 mm accuracy.

5Precisionsbearbetning

CNC pulley lathe completes turning and drilling in one setup.
Repeat positioning ≤0.01 mm with surface finish Ra ≤1.6 μm.

6Final Inspection&Packing

Dimensional checks, groove inspection, and rotation testing before release.
Anti-corrosion protection and reinforced packing for safe transport and delivery.

DAFANG CRANE: Your Trusted Partner for Cranes and Industrial Solution

Fabriksstyrka

Etablerat år 2006, Kapital: 84,65 miljoner USD
Över 80 000 kranar levererade över hela världen
Exporteras till fler än 100 länder, fler än 130 eftermarknadscenter

Intelligent tillverkning

1 053 000 m² intelligent bas
Automatiserade linjer för pålitlig leverans
Fullständigt egenutvecklade kranar och stålkonstruktioner

Kvalitet och certifiering

11 inspektionssteg, 200+ testobjekt
Allt-i-ett-tjänst: design, tillverkning, logistik, installation och eftermarknad

DAFANG CRANE Holds Complete Certifications for Global Compliance

CE Certificate for Gantry Crane

EAC Certificate for Gantry Crane

ISO-certifikat för kvalitetsledningssystem

Nuclear Industry Quality Management System Certificate

Produktionslicens för specialutrustning

Kundbesök på DAFANG CRANE-fabriken

Pakistansk | Introduktion till certifikat

Chile | Verkstadsinspektion

Kenyansk | Fabriksrundtur

Boliviansk | Fabriksrundtur

Vitryska | Fabriksrundtur

Russia | Factory Tour

USA | Verkstadsinspektion

Jordanien | Fabriksrundtur

Betrodda globala kranmärken: Upptäck DAFANG CRANE på internationella utställningar

FABEX & Metall & Stål Saudiarabien 2025 Utställning 1

Uzbekistans 8:e nationella råvarumässa för Sidenvägen Utställning 2

Uzbekistans maskinexpo 2025 Utställning 3

10:e Changyuan internationella kranmässa Utställning 4

2024 Shanghai tungmaskinutställning Utställning 5

7:e Changyuan internationella kranmässa Utställning 6

24-timmars precisionscitat

Cindy

Internationell försäljningschef

WhatsApp: +86 191 3738 6654
E-post: sales@hndfcrane.com

Jag heter Cindy och har 10 års arbetserfarenhet inom kranbranschen och samlat på mig en mängd professionell kunskap.

Om du har några behov eller frågor om kranar, tveka inte att kontakta mig, jag kommer att använda min expertis och praktiska erfarenhet för att hjälpa dig lösa problemet!