Devorga o'rnatilgan yelkali kranlar

BZQ jib crane is a kind of lifting equipment used in conjunction with electric chain hoist or electric wire rope hoist. It has the characteristics of easy operation, reliable operation and convenient maintenance. This model is widely used in the lifting and lowering materials of the machine tool in the workshop, and the lifting of workpieces between processes and production lines. When the jib crane is in operation, the cantilever is driven by the reducer gear or pull ring pushed by hand to realize the movement of the hoisted object. The biggest advantage of the jib jib crane is that it can be directly installed on the wall or column, or can also be installed on the machine equipment, so it does not need to occupy any ground space, the installation method is simple, and the lifting capacity is 0.25t-2t.

Dafang Wall Mounted Jib Cranes require no floor space and no special foundations. Low cost method of manipulating loads where lifting space can be limited to between 180 and 270 of rotation provided by a wall or column mounted jib crane and where repetitive lifts are not required. They quickly fold out of the way of large overhead cranes.

Hoist coverage along walls or columns. Supplement to an overhead crane and monorail. Like workshop, warehouse and so on.

• To'liq konsol dizayni.
• Bog'lovchi tayoq bilan qo'llab-quvvatlanadigan bom bilan devorga qavs.
• Design uses a standard.
• Easy operating.
• Don’t take up the ground space.
• Easy maintenance.

Wall mounted jib cranes utilize existing structures for support which eliminates the need to increase floor obstructions by adding additional columns. Costly foundations are not required.

Capacities are limited by the size of your existing walls or columns. (In some cases we can reinforce existing structures for increased capacity). Lighter loads can be handled with enclosed rail systems while heavier capacities require structural steel beams.

One of the largest disadvantages to the use of wall mounted jib cranes is the high cost of engineering needed to determine if the building structure that they are going to be attached to will support them.