High Strength Crane Sheaves with Precision Rope Grooves

4 Proven Crane Sheave Types for Distinct Performance Needs

Forged Crane Sheaves

Material: Precision steel 42CrMo, providing stable strength and good durability.
Forging Process: Improves metal structure and grain flow for high mechanical strength.
Cost Level: Higher cost due to complex forging steps.
Machinability: Easy to machine, causing low wire rope wear.
Typical Use: For conventional CD and MD electric hoist hooks.

Cast Crane Sheaves

Cost Efficiency: One-step casting enables complex shapes and a lower cost.
Service Life: Graphite lubrication plus quench, temper, and shot blasting reduce wear.

Rolled Crane Sheaves

Hot Rolling: Enhances sheaves bending, shear strength, and structural stability.
Precision Groove Grinding: Accurate groove radius for smoother wire rope contact.

Nylon Crane Sheaves

Spark-Free Safety: Machining produces no sparks, enhancing safety in flammable or explosive environments.
Typical Use: Commonly used in european type electric hoists hooks.

Cast Crane Sheaves for Overhead Cranes

특징

Rolled Crane Sheaves for RMG Gantry Cranes

특징

Groove Treatment: Medium-frequency hardened, HRC 40–50+.
Mounting Base: Split-type design with standard specifications for easy spare part interchange.
Rope Alignment: Entry/exit deviation ≤2.5°.
Wheel Diameter: Minimum 25× wire rope diameter.

Forged Crane Sheaves for Foundry Overhead Cranes

특징

Nylon Crane Sheaves for European Overhead Cranes

특징

Ultra-Lightweight: Cast nylon sheaves weigh only 1/7–1/8 of steel.
Enhanced Rope Support: Elastic groove deformation under load increases rope–groove contact area, improving load distribution.
Corrosion Resistant: No rust or seawater corrosion; no coatings required.

Rolled Crane Sheaves for Harbour Portal Cranes

특징

Material: Hot-rolled Q345B steel.
Groove Heat Treatment: Rope grooves hardened to RC40–45, hardening depth >2mm, precision machined.
Groove Depth: Minimum 1.5× wire rope diameter, smooth surface.
Rope Alignment: Rope entry/exit angle deviation ≤2.5° from wheel axis vertical plane.

Rolled Crane Sheaves for Mechanical Four Rope Grabs Bucket

특징

Material Density: Sludge bulk density 0.8–0.9 t/m³ (1–3 spans); Formed fuel bulk density 1.1–1.3 t/m³ (4 spans).
Grab Volume: 2.5 m³ (sludge).
Wire Rope Diameter: 17.5 mm.

1CNC Cutting & Blanking

German Mesell CNC cutting machine delivers precise cuts with Ra ≤12.5 μm.
Raw materials undergo basic spectral and mechanical checks to ensure adequate strength.

2Controlled Material Heating

Heating furnace raises plasticity and lowers forming resistance.
Proper temperature range promotes recrystallization and uniform grain structure.

3Forging Forming

8000-ton forging ring press applies localized pressure with minimal die contact.
Requires only 1/5–1/10 of conventional forging force with a short 2–4 min cycle.

4Heat Treatment

5정밀 가공

6Final Inspection&Packing

Dimensional checks, groove inspection, and rotation testing before release.
Anti-corrosion protection and reinforced packing for safe transport and delivery.