इस्पात निर्माण कार्यशालाओं में उच्च तापमान पिघली हुई धातु के संचालन के लिए YZ200t लैडल ओवरहेड क्रेन

Customer Profile – MCC Oriental

MCC Oriental is a leading engineering and equipment supplier in the metallurgical sector, specializing in the construction and upgrading of large-scale steelmaking plants. The company provides integrated solutions covering steelmaking, continuous casting, rolling, and metallurgical logistics.

To enhance the efficiency and safety of molten metal transportation in its steelmaking workshop, MCC Oriental partnered with DAFANG CRANE to introduce an advanced heavy-duty करछुल ओवरहेड क्रेन system.

Project Overview – YZ200t Ladle Overhead Crane

To upgrade molten metal handling, MCC Oriental adopted the DAFANG YZ200t Ladle Overhead Crane, designed with a four-girder, four-rail twin-trolley structure.

Key specifications include:

• Span: 28 m
• Lifting Height: 22 m (main trolley) / 24 m (auxiliary trolley)
• Hydraulic Synchronous Hoisting System: 5 lifting points, synchronization error ≤0.1 mm
• Dual Operation Modes: Wireless remote control + cabin operation
• Standards Compliance: GB/T 3811 crane design code, ISO 12482 safety monitoring
• Environmental Adaptation: Optimized for high-temperature and heavy-dust metallurgical environments

This system enabled the customer to achieve breakthrough performance in molten metal transfer operations.

मुख्य अनुप्रयोग परिदृश्य

Hot Metal Ladle Transfer

• Task: Handling 180-ton hot metal ladles (Ø 3.5 m, H 4.5 m)
• Hydraulic synchronous hoisting + laser alignment
• Lifting time reduced from 2.5 hours to 55 minutes
• ऊर्ध्वाधर विचलन 1/1000 के भीतर नियंत्रित

Steel Billet Continuous Casting

• Task: Lifting 100-ton billets (14 m × 1.8 m) during continuous casting
• Four-girder design minimizes deflection
• Smooth operation with 35% reduction in scrap rate

Multi-Crane Coordinated Operation

• Task: Synchronous lifting of two continuous-casting billets (90 tons each)
• Precise synchronization of speed and position
• परिचालन दक्षता +45%
• Energy consumption –28%

प्रमुख तकनीकी नवाचार

हाइड्रोलिक सिंक्रोनस उत्थापन प्रणाली

• Proportional valves + displacement sensors enable millimeter-level accuracy
• Equipped with emergency manual pump for safe lowering during power failure

बुद्धिमान सुरक्षा निगरानी

• Real-time monitoring of 15 key parameters such as beam stress and support settlement
• 3D laser anti-collision system (70 m pre-warning range, ±8 cm accuracy)

Environmental-Resistant Design

• Q460E high-strength steel + dual thermal insulation layer
• Wind resistance up to Class 13
• Electrical system rated to IP67, suitable for extreme heat and dust

Customer Benefits & Feedback

Production Efficiency

• Steelmaking output increased from 1,400 tons/day to 1,900 tons/day
• Overall production rhythm improved by 35%

लागत अनुकूलन

• Hydraulic synchronous system reduces energy use by 38%
• Annual electricity savings of approx. 2 million RMB

सुरक्षा प्रदर्शन

• Zero accidents during six years of operation
• Certified by ISO 45001 Occupational Health & Safety

MCC Oriental recognizes this project as a benchmark for ultra-heavy-duty, high-temperature metallurgical crane applications, and a milestone in upgrading steel plant logistics toward efficient, safe, and green operations.

सिंडी

व्हाट्सएप: +86-19137386654

ईमेल: cindywang@hndfcrane.com

मैं सिंडी हूँ, क्रेन उद्योग में 10 वर्षों के कार्य अनुभव के साथ और पेशेवर ज्ञान का खजाना जमा किया है। मैंने 500+ ग्राहकों के लिए संतोषजनक क्रेन चुनी हैं। यदि आपके पास क्रेन के बारे में कोई ज़रूरत या प्रश्न हैं, तो कृपया मुझसे संपर्क करने में संकोच न करें, मैं आपकी समस्या को हल करने में आपकी मदद करने के लिए अपनी विशेषज्ञता और व्यावहारिक अनुभव का उपयोग करूँगा!